[转帖]建立新单位教程（英文）

飛揚寒星 · 发表于 2006-6-9 12:35:25

New Unit Creation Tutorial by scenario_t_c 
• Red texts are basic steps. 
• Blue texts are actions that should be taken in the showcase example. 
In order to prepare for making a whole new unit, you should decompress the game database, read the data and convert them into text with GeniEd first. 
1. The first step to create a whole new unit is to select an existing one as a base and get its unit ID. For example, if I choose to duplicate the militia and modify it further to make a whole new unit, I should find its unit ID: 74. 
2. Knowing the unit ID, you can open the file "units.txt" (created by the "Convert Data to Text" command in GeniEd) under the "text" folder in "ged_data" directory. Then, you should copy all the lines beginning with "unit_[the unit ID of base unit]_" into "patches.txt" . Continuing the above example, these are the lines you have to copy when using militia as the base unit: 
unit_74_exists: 1 
 
unit_74_count: 7 
 
unit_74_0_unknown01: 1 
 
unit_74_0_unknown02: 0 0 0 7 0 
 
unit_74_0_unknown03: -<st1:chsdate w:st="on" Year="2001" Month="1" Day="1" IsLunarDate="False" IsROCDate="False">1 -1 -1</st1:chsdate> -1 -1 -1 -1 
 
unit_74_0_unknown04: 0 0 
 
unit_74_0_unknown05: 0 
 
unit_74_0_unknown06: 1 
 
unit_74_0_unknown07: 3 
 
unit_74_0_unknown08: 1 1 1 0 0 0 5 0 0 
 
unit_74_0_graphics: -<st1:chsdate w:st="on" Year="2001" Month="1" Day="1" IsLunarDate="False" IsROCDate="False">1 -1 -1</st1:chsdate> -1 -1 -1 
 
... 
 
unit_74_6_unknown01: 1 
 
unit_74_6_unknown02: 6 0 0 3 0 
 
unit_74_6_unknown03: <st1:chsdate w:st="on" Year="2013" Month="1" Day="1" IsLunarDate="False" IsROCDate="False">13 -1 -1</st1:chsdate> -1 -1 -1 -1 
 
unit_74_6_unknown04: 0 0 
 
unit_74_6_unknown05: 1 
 
unit_74_6_unknown06: 0 
 
unit_74_6_unknown07: 0 
 
unit_74_6_unknown08: 0 0 0 0 0 0 1 0 0 
 
unit_74_6_graphics: -<st1:chsdate w:st="on" Year="2001" Month="1" Day="1" IsLunarDate="False" IsROCDate="False">1 -1 -1</st1:chsdate> -1 -1 -1 
3. Now, you should close "units.txt" and open another file in the "text" folder - "civ0units.txt". In this file, you have to copy another series of text lines again, this time beginning with "civ_0_unit_[the unit ID of base unit]_", to " patches.txt". In this case, the lines you need would be like the following: 
civ_0_unit_74_type: 70 
 
civ_0_unit_74_name_length: 6 
 
civ_0_unit_74_id1: 74 
 
civ_0_unit_74_name_language: 5079 
 
civ_0_unit_74_command_language: 6079 
 
civ_0_unit_74_class: 6 
 
civ_0_unit_74_graphic_stand01: 1102 
 
civ_0_unit_74_graphic_stand02: -1 
 
civ_0_unit_74_graphic_die01: 1099 
 
civ_0_unit_74_graphic_die02: -1 
 
... 
 
civ_0_unit_74_attack_missile_duplication_amount01: 1 
 
civ_0_unit_74_attack_missile_duplication_amount02: 1 
 
civ_0_unit_74_attack_missile_duplication_unknown01: 1 1 1 
 
civ_0_unit_74_attack_missile_duplication_unit: -1 
 
civ_0_unit_74_attack_missile_duplication_graphic: -1 
 
civ_0_unit_74_unknown35_12: 0 
 
civ_0_unit_74_displayed_pierce_armour: 1

[此贴子已经被作者于2006-06-09 00:38:49编辑过]

飛揚寒星 · 发表于 2006-6-9 12:39:23

As you can see, these are also the data about different attributes of the unit, which you should alter in order to create a new unit instead of just a duplication of an old unit. You could either refer to the "Recent Study on AoK:TC Unit Structure in GeniEd" article to learn about how to alter these data, or use GeniEd2 to do this task later. 4. After all those copying tasks, what you should do now is go back to the top of "patches.txt" and replace all "civ_0_" into "civ_*" . This will make the lines containing the texts become variable patches. If you don't want to use variable patches, copy and paste all those lines beginning with "civ_0" for 18 times, while replacing all "civ_0_" in every duplication of them with "civ_1" to "civ_18" by turns . 5. Furthermore, you have to find out what the unit ID of your new unit is. Since there are only 866 units in the default game database, the very first new unit you create should be the 867th one, thus having 866 as its unit ID. Subsequently, you can go back to the top of "patches.txt" again and replace all "_[the unit ID of base unit]_" into "_[the unit ID of new unit]_" . In the militia example, this would be replacing all "_74_" into "_866_" . 6. Thereafter, here comes something not copying, editing or replacing. You should enter the following lines into "patches.txt": unit_count: [866 + the number of new unit(s)] civ_*_unit_count: [866 + the number of new unit(s)] civ_*_pointer_[the unit ID of new unit 1]: 37822640(or any value greater than 0) civ_*_pointer_[the unit ID of new unit 2 (if there is one)]: 37822640(or any value greater than 0) ... If you want to add just one new type of unit, these are the lines you should insert into " patches.txt" (37822640 can be replaced by any value greater than 0): unit_count: 867 civ_*_unit_count: 867 civ_*_pointer_866: 37822640 If you want to add two new types of unit, these are the lines you should insert into "patches.txt " (37822640 can be replaced by any value greater than 0): unit_count: 868 civ_*_unit_count: 868 civ_*_pointer_866: 37822640 civ_*_pointer_867: 37822640 ... so forth and so on. 7. This is an optional step, and only for creating new unit that could be trained from a building. To achieve this, you need to add new techage slot and new research slot by inserting following lines into "patches.txt": techage_count: [514 + the number of trainable new unit(s)] research_count: [460 + the number of trainable new unit(s)] techage_[513 + the number of trainable new unit 1]_name: CHUN4 techage_[513 + the number of trainable new unit 1]_count: 1 techage_[513 + the number of trainable new unit 1]_0_type: 2 techage_[513 + the number of trainable new unit 1]_0_unit: _[the unit ID of new unit 1] techage_[513 + the number of trainable new unit 1]_0_class: 1 techage_[513 + the number of trainable new unit 1]_0_attribute: -1 techage_[513 + the number of trainable new unit 1]_0_amount: 0 research_[459 + the number of trainable new unit 1]_required_tech: -1 -1 -1 -1 -1 -1 research_[459 + the number of trainable new unit 1]_cost1_type: -1 research_[459 + the number of trainable new unit 1]_cost1_amount: 0 research_[459 + the number of trainable new unit 1]_cost1_used: 0 research_[459 + the number of trainable new unit 1]_cost2_type: -1 research_[459 + the number of trainable new unit 1]_cost2_amount: 0 research_[459 + the number of trainable new unit 1]_cost2_used: 0 research_[459 + the number of trainable new unit 1]_cost3_type: -1 research_[459 + the number of trainable new unit 1]_cost3_amount: 0 research_[459 + the number of trainable new unit 1]_cost3_used: 0 research_[459 + the number of trainable new unit 1]_required_tech_amount: 0 research_[459 + the number of trainable new unit 1]_civ: -1 0 research_[459 + the number of trainable new unit 1]_location: -1 research_[459 + the number of trainable new unit 1]_description: 7000 research_[459 + the number of trainable new unit 1]_help: 8000 research_[459 + the number of trainable new unit 1]_time: 0 research_[459 + the number of trainable new unit 1]_effect: [513 + the number of trainable new unit 1] research_[459 + the number of trainable new unit 1]_unknown01: 0 research_[459 + the number of trainable new unit 1]_icon: -1 research_[459 + the number of trainable new unit 1]_button: 0 research_[459 + the number of trainable new unit 1]_pointer: 107000 157000 -1 research_[459 + the number of trainable new unit 1]_name1_length: 0 research_[459 + the number of trainable new unit 1]_name1: techage_[513 + the number of trainable new unit 2 (if there is one)]_name: CHUN4 ... Proceeded with the above instance, the required lines would be: techage_count: 515 research_count: 461 techage_514_name: CHUN4 techage_514_count: 1 techage_514_0_type: 2 techage_514_0_unit: 866 techage_514_0_class: 1 techage_514_0_attribute: -1 techage_514_0_amount: 0 research_460_required_tech: -1 -1 -1 -1 -1 -1 research_460_cost1_type: -1 research_460_cost1_amount: 0 research_460_cost1_used: 0 research_460_cost2_type: -1 research_460_cost2_amount: 0 research_460_cost2_used: 0 research_460_cost3_type: -1 research_460_cost3_amount: 0 research_460_cost3_used: 0 research_460_required_tech_amount: 0 research_460_civ: -1 0 research_460_location: -1 research_460_description: 7000 research_460_help: 8000 research_460_time: 0 research_460_effect: 514 research_460_unknown01: 0 research_460_icon: -1 research_460_button: 0 research_460_pointer: 107000 157000 -1 research_460_name1_length: 0 research_460_name1: You could refer to other articles like "Altering a Techage Slot", "Modifying a Research Slot" and "Adding a Technology" to learn more about editing techage slot and research slot data. 8. The final step would be go back to GeniEd and have the program read the data again , then asking it to create a new genie file using data in "patches.txt ".

显示全部楼层 · 发表于 2006-6-9 17:17:53

哎，看不懂，谁来翻译一下啊？

		自动登录	找回密码
密码			注册翔鹰会员(昵称)

[旧资料] [转帖]建立新单位教程（英文）

特级嘉禾勋章

一级帝国勋章

鹰之智者